Part Number: 1800-48-125S ULTRA NT SCIF Barrier Solid - Roll Size 48" x 125' (500 sq/ft) Price : $134.00Plus $10.00 Shipping per roll anywhere in the Continental US!
ULTRA NT SCIF Barrier (Solid) is an aluminum foil based radiant barrier comprised of two reflective surfaces, sandwiched around a high-strength reinforcing scrim. Ultra NT SCIF Barrier is fully compliant with Sensitive Compartmented Information Facility (SCIF) applications, and provides an effective attenuation barrier against a wide range of RF frequencies. In addition to being highly durable, Ultra NT SCIF Barrier is flexible, lightweight, and easily installed in many different building types.
Ultra NT SCIF Barrier is a heavy duty radiant barrier sheet made up of a single layer of woven polyethylene material bonded to - and sandwiched between - two highly reflective aluminum surfaces. Ultra NT SCIF Barrier is used in SCIF (Sensitive Compartmented Information Facilities) - a special facility for handling sensitive data. Ultra NT Radiant Barrier is also an approved vapor barrier.
Ultra NT SCIF Barrier has successfully been used in SCIF applications for sound attenuation and RF frequency shielding. Ultra NT SCIF Barrier is easy to install and manufactured of non-harmful components.
What is SCI and SCIF?
SCI (Sensitive Compartmented Information) - information and materials that require special controls for restricted handling within compartmented intelligence systems and for which compartmentation is established.
SCIF (Sensitive Compartmented Information Facility) - A term used by the Department of Defense for a secure room or data center that inhibits electronic surveillance and suppresses data leakage.
Ultra NT SCIF Barrier *Installation Instructions
The Radio Frequency Shielding application is highly specialized. We provide the following instructions only as a guide. Please consult the architect for correct application for any project.
Please unroll the Ultra NT SCIF Barrier product and cut it to appropriate lengths to cover all walls, ceilings, and floors of a room or building that you want shielded from RF transmission.
If the building is made of wood framing, you can staple the product to the wood directly stapling every 6-10 inches.
If the building is made of concrete, than you can use a general purpose construction adhesive to attach the product to the concrete wall. A bead of adhesive at 1 foot intervals should be sufficient to hold the product in place.
In some cases, the Ultra NT SCIF Barrier must be installed between two layers of 5/8 gypsum board please consult with the architect to be sure.
Make sure to overlap all Ultra NT SCIF Barrier joints by 6 and then use an aluminum foil tape to seal all seams.
When you reach the top of a wall, extend the Ultra NT SCIF Barrier so that it extends around the corner and onto the ceiling for 6 inches.
When you reach the bottom of a wall, extend the Ultra NT SCIF Barrier so that it extends onto the floor by 6 inches.
Install more Ultra NT SCIF Barrier material on the ceiling and the floor to complete the job.
*The installation guidelines shown above are for informational purposes only and are not intended to supersede any Architectural specifications. The Architectural specifications for any job shall override the information presented on this installation sheet with regards to appropiate products to use and the appropiate method to use for that particular
155 g/m22 (0.52 oz/sq.ft.)
-60ΊF to 190ΊF (-51oC to 88o C)
CLASS 2 / CLASS B
TENSILE STRENGTH - MD
TENSILE STRENGTH - CD
WATER VAPOUR PERMEABILITY
RESISTANCE TO FUNGI & BACTERIA
DOES NOT PROMOTE GROWTH
Sheilding Effectiveness - Test Standard IEEE-299 / ASTM D4935 *Test results for Ultra NT SCIF Barrier 1800-48-125S solid product only.
Horizontal Calibration Signal (watts)
Horizontal Signal Meausrement (watts)
Horizontal Shielded Effectiveness
Vertical Calibration Signal (watts)
Vertical Signal Measurement (watts)
Vertical Shielded Effectiveness
We understand how critically important fast and accurate shipping is to to you!
All in stock orders received by 12:00 noon cst will ship the next business day.
If the product is not in stock you will be notified immediately.
If you decide to cancel your order because the product is not in stock after you are notified, you have the option to receive a full refund.
Tracking numbers for all shipments will be emailed to you when your order is shipped.
For transit times and to confirm that a product is in stock prior to ordering, please call Michael Thrift at 800-216-1223
For additional information or assistance placing your order for ULTRA NT SCIF Barrier, please contact Michael Thrift at 1-800-216-1223 or email at Michael@tvmbuildingproducts.com
Click here to open and print the technical data sheet for ULTRA NT SCIF Barrier part#1800-48-125
On quantities of 10,000 square feet or more please call 1-800-216-1223 or complete the following quote request form.